DIY drywall elevators

Installation of drywall requires two pairs of hands minimum. This is due to the fact that the mentioned building material has a large size and an impressive weight. If it is not possible to use help, then you need to use a special lift, which you can easily make yourself or buy at a hardware store.

Features and Purpose

drywall lifts

GKL lift is a device with which you can lift the sheets to a certain height in order to fix them in the desired position. At the same time a person will not have to make special efforts. The main advantages of such devices are simplicity of their use and time saving.

Lifts for drywall can be perfectly used for finishing the frame. The design allows you to install materials of any size, which is very convenient, even if you have to work alone.Sheet must be laid on the support frame and raised to the desired height, reinforcing the frame itself. With the help of the described device you can also mark the corners, as well as the ceiling.

With independent work, such manipulations can be made with errors. If the lift will be used when raising the laser level, then you will be able to depict the ideal line for mounting the frame the first time. Quite often, professionals and home masters use the lifts to assemble profiles when they have to work with hard-to-reach areas. Instead of drywall on the lift should be laid profile guides, which rise to the line markings.

Varieties of lifts

how to make a lift for drywall

Lifts for drywall can be classified by use, they are:

  • universal;
  • ceiling;
  • wall

The main feature of these designs is the layout of the desktop. If we are talking about wall varieties, then it is located vertically, whereas at the ceiling lift it has a horizontal orientation.Universal lift allows you to change the angle of the table, depending on what kind of work you want to do.

Design features of the lift

drywall mounting lift

Lift-strut for drywall should consist of several parts, among them:

  • tripod;
  • telescopic stand;
  • Rotary table;
  • winch.

Telescopic tripod must have a few legs, they need to be welded to ensure stability, their number can vary from 3 to 4. For ease of use, legs are equipped with wheels with stoppers. A tripod can be made of several sections of a profile pipe, its cross section can be equal to 40, 60 or 80 mm. The pieces are inserted one into the other, and on one side you need to install plugs. At the end of the thin tube is mounted, so that it was possible to establish a rotating plane.

When making a lift for drywall with your own hands, you will need to make another turntable. At the first stage, the frame is formed in the shape of the letter H, it must have a through jumper in the center. Supports are installed in the holes on both sides for fixing a bulky sheet of finishing material.As for the winch, it is better to buy it in finished form, than to engage in manufacturing independently. In the role of fastening for it, you need to use a remote beam with a diagonal.

Making a lift do it yourself

lift strut for drywall

If you make a lift in the form of a spacer yourself, then it will be no less effective than a professional device. You can do such work at home. It is possible to use metal profiles and wood for assembling the elevator. Additionally, you will need a winch and fasteners.

Billets should be bolted together. Lifts for drywall are sometimes disposable. They are used to work in the same room during repairs. After the design can be disassembled. If the lift is to be used many times, then it can be made universal, then it is suitable for different ceiling heights. The first option is easier to rework for another room.

Technology of work

drywall lift premos

Before you make a lift for drywall, you should choose a timber, the length of which should be equal to the distance from the ceiling to the floor.Bars are interconnected in the shape of the letter T, nails should be used for this. Gussets are installed on the subcortex, which will give the structure rigidity. They are mounted diagonally, ranging from a vertical support to a horizontal bar.

It is important to measure the right angle, and after installation you should get two isosceles triangles. If this rule is not followed, then ultimately the lift will not be accurate and reliable. If necessary, in the next step, you can make a more horizontal surface by installing additional beams. It is important that the corners are straight.

If the farm has a professional welding inverter, then the drywall lifts can be made universal. To do this, prepare several pipes for the manufacture of telescopic legs. Section can be round or square. For the table, use pipes with the following dimensions: 30 x 20 x 2 and 40 x 25 x 2 mm.

Assembly Instructions for Metal Lift

plasterboard lift do it yourself

When a metal lift is installed for mounting drywall, the table is mounted in the same way as in the above case.The kerchiefs must be installed at a right angle, it will be most convenient to fix them with a welding joint, and the bolts should be discarded.

Holes should be made in the pipes through which the winch will pass. A drum is installed on the widest pipe that will serve as a bed. At the next stage, the frame, movable legs and a table can be joined together by the welding method. You can use bolted connections, because if necessary, the structure can be quite easily disassembled.

Description of the lift "Premos"

The lift for drywall "Premos" is a modern device. His device facilitates the process of installation of paintings, so for many professionals and home craftsmen, it has become indispensable. This lift is designed to fix the sheets of drywall at the surface of the ceiling in a horizontal position. The advantages of the device are:

  • possibility of lifting and fixing the sheet in any position;
  • moving sheets from one place to another;
  • the possibility of using the design not only for the installation of drywall, but also for the installation of air conditioners, massive lighting fixtures, dimensional equipment and ventilation elements.

The lifting height can vary from 3.2 to 4.2 m. The total capacity is 100 kg, while the total weight of the structure is 23 kg. The device is very convenient not only during operation, but also during transportation.

Conclusion

For those people who are used to working alone, a device for lifting drywall is perfect. It allows not only to lift, but also to carry massive overall canvases. The design allows you to change the position of the sheet in space without damaging its structure. For ease of use, manufacturers supply the elevators with a foot counterweight, which is a pedal operating on the lever principle.

Related news

DIY drywall elevators image, picture, imagery


DIY drywall elevators 48


DIY drywall elevators 36


DIY drywall elevators 78


DIY drywall elevators 81


DIY drywall elevators 86


DIY drywall elevators 12


DIY drywall elevators 44