How to make a swing with your own hands: a technological process

For men who have children growing up, it's time to think about the right and active rest of theirhow to make a swing with your own handschildren. Of course, the swing is the most common amusement among the young inhabitants of the yard. Not only children like to spend time on a swing, but adults sometimes actively rest on them. Therefore, the head of the family faces the question: "How to make a swing?" With your own hands to perform this useful thing is simple enough, if you have an idea of ​​where to start and what it will take.

To make a swing, you will need the following:

  • bar (dimensions - 100 * 100 mm), well dried;
  • corners on a metal base;
  • fasteners, screws and bolts.
  • screwdriver;
  • Reiki, bars for making a bench.

When connecting a bench for a swing and a supporting element,garden swings varaderodweiler device. In a question that concerns how to make a swing with your own hands, there are enough nuances, but there are no impracticable. As a hitch can serve a cable without villi and notches or a special hook device.

So, the materials are ready, now you can take onmaking a swing. You should start from the very bottom and implement the supporting structures. For this, at the initial stage, the lower frame is constructed, to which the support bars are then fastened. In most cases, the size of the bar is curled from the dimensions of the bench of the swing. At the second stage, vertical bars to the lower frame (self-tapping screws or bolts) are fastened. After fixing the bars, triangles form on which a horizontal bolt is fastened. The basis is laid, you can start making a bench swing. You need two frames: one for the backrest, the other for the seat. To the finished frames, plywood is attached or racks are fastened, if desired. Next, the finished frames are fixed to each other with prepared corners of metal. For convenience, it is necessary that the angle between them be equal to 120 degrees. Armrests are made from uneven bars. They are installed on the frame structure of the bench and bolted.

That's practically what we answered the question about,how to make a swing with your own hands. It remains only to fix the hooks on the upper crossbar, which will serve as a suspension of the bench, and through special brackets to extend the cable or a special chain. The height of the bench from the ground is regulated so that a person can easily reach the ground. Optimum variant of sitting - depth of 60-70 cm, while the length should be 170-180 cm.garden swings tornado

Today you can find a lot of swings in the stores. The garden swings "Tornado" look quite attractive. In appearance, they also do not step the others. Not a bad alternative for your own garden - a garden swing "Varadero". You can take them for a sample and already on them to make their own product. After all, for you is no longer a secret, how to make a swing with your own hands at home.

You can supplement the constructed swings with speciala tent or a small roof. To do this, you only need to fix the structure over the main product. The roof can be made from the same racks as the bench. The tent is much easier to do: pull any strong fabric on the bars and fasten on the top of the swinging beams. A swing will not only become entertainment for children, but also an excellent decoration of your yard or garden.

Related news

How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process How to make a swing with your own hands: a technological process