Lilac ribbon embroidery: features, step-by-step description, master class and recommendations
The creation of satin ribbons is a popular trend in modern embroidery. Of particular interest among masters cause flowers: they are obtained as real. There are many techniques for decorating various inflorescences. When embroidering with lilac ribbons, you can use different versions of stitches and create bouquets that are indistinguishable from natural ones.
Techniques for embroidery ribbons lilacs
The branch of lilac consists of many small buds, gathered in a cone-shaped whisk. Every single flower in a typical variety can have 3-5 petals, in a terry - 2 times more. In both cases, each flower is sewn separately.
The branch of lilac can be made in several ways: collect the inflorescence from separate ready-made buds, use a band stitch, a colonial or French knot.The method of assembling fabric is a common way to design the central part of large flowers, such as sunflowers, also suitable for creating lilacs.
Band seam method for lilac embroidery
For beginners using the lilac ribbon embroidery technique, the easiest way is to start with a tape seam: each flower petal is made separately, the ribbon is pulled out from the center, and then the needle is placed near the exit point. Stretch tape, giving it the desired shape from the seamy side. Each flower consists of 4-5 petals made in this technique. It can take a long time to create one branch of lilac, but this method of embroidery is suitable for beginners. The upper part of the lilac inflorescence, with closed buds, is performed using one stitch.
French and colonial nodule
In the technique of French and colonial knots, small roses are most often made. In the first case, the tape is displayed on the front side, expands, and the needle is placed on top, around which you need to make two turns. If the knot is made of floss threads, three or more turns of the tape are possible. Then the needle must be inserted in a pair of millimeters from the point of withdrawal and, holding the fingers, gently tighten the loop.
The size of the bud depends on the number of wraps - the more, the larger it will be.The difference of the colonial knot is that the tape on the needle is wound by an eight. On close examination, the inflorescences made in this technique are very similar to roses.
Fabric assembly method
Fabric assembly for embroidery lilac ribbons combines work with satin and floss. The needle with the end is displayed on the front side and is assembled into an accordion with several stitches of a thread of the same color with the help of another needle. Then you need to tighten the "wave" and remove the tape from the inside at a short distance from the entry point, forming a flower. Petals are fixed with threads. The appearance of the product largely depends on the number of shades used in the work: the more of them, the more alive and interesting the embroidery will look.
Lilac from individual flowers
Lilac brushes can be collected from individual buds that are sewn to the fabric, but this method is rather time-consuming and is more suitable for experienced needlewomen. To create flowers in this technique, cut the ribbon with a width of 2.5 cm of purple hue into pieces of 8-10 cm. Scorch each segment on both sides. Then take one blank, fold it in half twice: folds on the material will show the size of the petals.
Bud formed obmetochnym seam:
- Tighten the thread well on the upper corner of the ribbon, otherwise the knot may slip during assembly.
- Then pull the seam down along the hem and slide along the bottom until the first fold.
- Lift up again, and then lower - and so on 4 times.
- When the thread reaches the top edge on the opposite side of the ribbon, pull it and collect the flower.
- Sew the beginning and end between each other.
After making the required number of colors, sew them to the base.
The branch of lilac: a master class for beginners
Inexperienced craftswomen can try a way in which each petal is embroidered with a regular straight stitch. First, it is better to practice on a small inflorescence. Self-confident, you can immediately buy a print for embroidery with lilac ribbons in the basket for beginners. Bouquets are very natural and will decorate any interior. Such paintings are often made out in a baguette and presented to friends.
For embroidery with lilac ribbons you will need:
- thick fabric;
- 5 mm wide satin ribbons of various shades of violet for inflorescence;
- brown satin ribbon 5 mm wide for the handle;
- 2.5 cm wide satin ribbon for leaves;
At the first stage, pull the material on the hoop, and then outline the outline of the desired pattern. The shape of the inflorescence will resemble sweet pepper on the handle. It is not necessary to transfer any particular pattern in detail - just a few light strokes are enough to make it easier to work. If it is difficult to draw by hand, use a paper stencil. If you embroider on the material with printed print, you do not need to schedule anything. Immediately proceed to embroidery lilac ribbons.
How to make a cutting of ribbons
Work begins with the design of the cutting. Take a brown ribbon, insert it into a needle and fix, departing about 2 cm from the edge. Make a puncture. Bring the ribbon to the front side at the base of the cutting and start rotating the needle, twisting the ribbon into a tube. Lay it on the picture and make a puncture right in the tape. Now you need to create two cuttings for the leaves. With the drawstring, go back to the middle of the straw and, piercing it, sew two stitches in the same way. Cut the ribbon and fasten it on the inside with a lighter.
Lilac Ribbon Leaves
At the next stage of the master class “Embroider lilac ribbons” we will create leaflets.To do this, take a 2.5 cm wide ribbon. You do not need to fasten it, leave a small tail on the wrong side. Bring the needle close to the handle, flatten it face out and, retreating 2-3 cm, make a puncture in the center of the ribbon and withdraw the needle to the inside. To make a sharp corner of the leaflet, hold the center piece with your finger, and pull the ribbon from the inside out right and left, forming edges. Cut and fix the ribbon on the reverse side, hiding the ends under the embroidery, and then make the second same leaf.
Lilac inflorescence of ribbons
Continue MK "Embroider lilac ribbons" and proceed to the manufacture of inflorescences. For convenience, draw a center point and petals on the fabric, retreating from the edge of the contour about 1.5 cm. Then take a ribbon of a suitable shade and draw on the border of the plotted point. To keep it from spinning, hold the center with one hand and with the other - pull it from the inside out. Each petal is embroidered with a separate stitch. Move in a circle, but do not sew the center - there should be a little space left. Then move on to another flower. To do this, select any stitch and use it as the first petal of the next bud.Again, draw a center point nearby and, changing the hues of the ribbon, tightly fill the entire space with buds.
Try combining several color creation techniques and enjoy the process. The work of embroidery with lilac ribbons is painstaking, but the result is worth the time and effort spent.